| Color: | |
|---|---|
| Quantity: | |
The Used BYD Seagull represents a strategic addition to any modern transport lineup, offering an optimal balance of urban agility and dependable electric performance. As a pre-owned pure electric vehicle originating from a globally recognized new energy pioneer, this compact model is meticulously reconditioned to deliver consistent daily utility. The exterior features a streamlined aerodynamic profile with a tactile, smooth finish that minimizes wind resistance, while the cabin greets operators with a clean, neutral scent and carefully maintained upholstery that feels firm and supportive. Designed to navigate congested metropolitan routes and tight parking zones, the vehicle ensures operational efficiency without sacrificing passenger comfort. Every unit undergoes rigorous diagnostic testing to verify battery integrity, motor responsiveness, and structural soundness, ensuring it meets strict international road-readiness standards. For organizations seeking to electrify their mobility solutions cost-effectively, this model provides a tangible reduction in total cost of ownership while actively contributing to emission reduction targets.
Parameter | Details |
Vehicle Type | Used pure electric car |
Overall Dimensions (L×W×H) | 3780×1715×1540 mm |
Wheelbase | 2500 mm |
Seating Capacity | 5-seat (4-door) |
Battery Type | Lithium iron phosphate battery |
Battery Capacity | 33.88 kWh |
Pure Electric Cruising Range | 305 km |
Charging Time (Fast) | 0.5 hours (80% charge) |
Max Power | 55 kW |
Top Speed | 130 km/h |
Acceleration (0-100 km/h) | 4.9 seconds |
Curb Weight | 1240 kgs |
Energy Consumption | 14.8 kWh/100km |
Drive Model | Left-hand drive |
Wheel Spec | 175/55/R16 |
Safety Features | Anti-lock braking, electronic stability control, multiple airbags |
Smart Features | Bluetooth connectivity, online navigation, keyless entry |
Condition Aspect | Description |
Exterior Condition | The exterior surfaces of the used BYD Seagull undergo a multi-point visual and physical inspection. The paintwork retains a deep, consistent gloss with no signs of oxidation, while the panel gaps remain factory-tight. The LED headlight assemblies are clear, projecting a sharp, focused beam essential for night-time visibility. Minor surface blemishes from standard road use are professionally corrected. |
Interior Condition | Inside the cabin, the environment is sanitized and detailed. The tactile surfaces, including the steering wheel and door panels, show minimal handling wear. The central touchscreen responds instantly to inputs without lag. Climate control vents deliver crisp, odor-free airflow, and the ergonomic seats maintain their original foam density for sustained driver comfort during long shifts. |
Mechanical Condition | The core electric drivetrain operates with a whisper-quiet hum, indicative of healthy motor bearings and an optimized reduction gear. Acceleration is linear and vibration-free. The regenerative braking system engages predictably, and the independent suspension components absorb road irregularities smoothly without any audible clunks or squeaks. |
Maintenance History | A transparent, documented service log accompanies the vehicle, verifying adherence to the manufacturer's recommended maintenance intervals. Diagnostic readouts confirm the lithium iron phosphate battery pack maintains a state of health (SOH) well above 80%, ensuring reliable energy storage and consistent range performance for future deployment. |
Safety Systems Check | Comprehensive electronic scans validate the readiness of all passive and active safety modules. The multiple airbag deployment circuits, electronic stability algorithms, and traction control sensors report zero fault codes. The rearview camera lens is scratch-free, providing a high-contrast feed to the main display for secure reversing maneuvers. |
The architectural layout of the used BYD Seagull maximizes internal volume within a minimal exterior footprint. While the turning radius is exceptionally tight for navigating dense urban grids, the interior offers surprising versatility. By folding down the rear seating row, the cargo capacity expands to a substantial 930 liters. This transformation makes the vehicle highly adaptable for light commercial logistics, urban rental services, or ride-hailing operations requiring frequent luggage transport. The doors close with a solid, reassuring thud, reflecting the structural integrity of the cabin.
Powered by the renowned Lithium Iron Phosphate (LFP) Blade Battery technology, this used pure electric car delivers outstanding thermal stability and longevity. The battery architecture is engineered to endure over 3,000 charge-discharge cycles while retaining a health capacity above 70%, drastically reducing long-term replacement costs for fleet operators. Consuming only 14.8 kWh per 100 kilometers, the powertrain translates electrical energy into forward momentum with minimal thermal loss, ensuring the 305 km cruising range remains dependable across varying weather conditions.
The 55 kW electric motor is calibrated to deliver instant torque, propelling the vehicle from 0 to 100 km/h in a brisk 4.9 seconds. This rapid response is crucial for safely merging onto highways or navigating fast-paced city traffic. The power delivery is entirely linear, eliminating the jerky gear shifts associated with internal combustion engines. Drivers experience a serene, quiet cabin environment, with acoustic insulation effectively dampening tire roar and wind noise, reducing operator fatigue during extended driving sessions.
Built upon the advanced e-Platform 3.0 and utilizing Cell-to-Body (CTB) integration technology, the vehicle boasts significantly enhanced torsional rigidity and superior side-impact resistance. The intelligent infotainment system is fully localized, offering interface options in English, Spanish, Portuguese, and other major languages. It readily synchronizes with smartphones, ensuring international operators can navigate and manage communications intuitively while keeping their focus securely on the road ahead.
To accommodate diverse international infrastructures, the vehicle's charging architecture can be adapted or modified to support mainstream DC fast-charging protocols, including CCS2 and Type 2 standards. This flexibility ensures straightforward integration into local municipal or commercial charging networks worldwide, minimizing operational downtime and eliminating the need for complex, proprietary charging stations.
Procuring pre-owned electric vehicles requires reliable post-purchase backing. We provide an end-to-end support ecosystem, starting with our certified export qualifications for new energy vehicles. Our logistics team handles the entire international transit process, from the domestic departure port to your overseas destination, including comprehensive customs clearance assistance. Beyond delivery, we ensure operational continuity by offering professional maintenance guidance and establishing a stable supply chain for original equipment manufacturer (OEM) replacement parts, such as cabin air filters, brake pads, and suspension components. Every used BYD Seagull is dispatched with a detailed 120-point diagnostic report, granting buyers complete transparency regarding the mechanical and electrical status of their investment.
The vehicle's advanced battery management system supports rapid energy replenishment. Using a compatible DC fast charger, the battery can be elevated from a low state to 80% capacity in approximately 0.5 hours, which is ideal for quick turnaround times during shift changes. For standard AC overnight charging, a full cycle typically requires 6-8 hours. The charging port mechanism engages with a distinct click, ensuring a secure connection, and the onboard thermal management prevents overheating during high-voltage intake.
While the verified 305 km pure electric range is primarily optimized for intra-city commuting, regional deliveries, and localized rental operations, it is entirely capable of medium-distance transit. For extended journeys, operators should map out routes utilizing the fast-charging network. The vehicle's regenerative braking system also recaptures kinetic energy during highway descents, subtly extending the operational range and providing a smooth deceleration feel when lifting off the accelerator.
Yes, each used BYD Seagull is supplied with a factory-inspected, heavy-duty standard AC slow-charging cable, featuring thick, durable insulation designed to withstand daily coiling and uncoiling. This allows for immediate integration into standard commercial or residential power grids. For organizations requiring rapid deployment, we also supply commercial-grade DC fast-charging adapters and cables as optional accessories, tailored to match your specific regional plug standards.
